banner



Home  ›  How To Put A Tarp On A Roof

How To Put A Tarp On A Roof

Written By Thursday, June 16, 2022 Add Comment Edit

Download Article

Download Article

Tarping a roof protects your home's interior from being exposed to the elements because of a damaged skylight or roof. A tarp also protect your roof from further damage. A tarped roof provides 90-day protection from the pelting. Tarping your roof ways your dwelling is protected so you lot can brand permanent repairs after on.

  1. 1

    Discover the betoken of damage on the roof. Apply a ladder to attain your roof.[1] If your roof is too steep to stand on, examine it from the ladder instead. Look for damaged roof tiles and scattered droppings. Examine the entire roof carefully. There may be more than one section where your roof is damaged.

    • Alternatively, go to your attic and examine the roof. Large water stains on the wood of the roof are tell-tale signs of damage.[2]

  2. two

    Measure the size of the damage. Carefully become onto your roof if you can. Kneel down by the damage and unroll a tape measure. Measure the precise dimensions of the damage. Remember to measure all points of damage.

    • If you don't know the dimensions of your roof, now is a proficient time to note them downwardly for later on.

    Advertising

  3. 3

    Have lots of pictures of the harm. With your phone or a camera, take as many pictures equally yous tin of the damage. By having show of the damage you should have an easier fourth dimension working with your abode insurance if you accept it. Having pictures of the impairment as well means you lot know how big a tarp yous need in the hardware shop.

  4. iv

    Buy a suitable tarp. Most hardware stores volition sell a variety of tarp sizes. Generally, it's better to make sure the tarp is bigger than what yous need than smaller. Most tarps encompass the bulk of a roof, but to exist safe, measure out the size of the damage and make sure your purchased tarp will cover the damaged area.[iii]

    • If you have whatever uncertainty, ask an employee for assist.

  5. v

    Ensure you have all the proper safety equipment. Repairing a roof can be unsafe. If you're sure yous want to repair the roof instead of a professional yous need to take all the appropriate equipment. A sturdy pair of boots, thick gloves, a business firm ladder, protective glasses, a helmet, and a loftier visibility vest are all essentials.

    6. Advertisement

  1. 1

    Get some friends or family to help you. If you programme on tarping your roof without a professional, you should bring some friends and family to aid. Laying out a tarp can exist dangerous, so information technology's important that you have an extra pair of easily to help with the more menial work.

    • If you lot are certain yous want to do it by yourself, make sure there'south someone in the house that can assist yous if in that location's an emergency.

  2. 2

    Clear all debris on the roof. If possible, wait to practice this on a dry day. Bring a brush with you onto the roof. Remove all branches, leaves, and droppings so that the roof is completely clear. Brand certain you brush off all the leaves so that no insect life is trapped under the tarp afterwards.[4]

    • If some of the branches are particularly heavy, you may need some help lifting them off your roof.

  3. 3

    Unroll the tarp from the corners. Tarps tin be unwieldy, particularly on a windy day. Bring the tarp out of its packaging. It tin either come folded, or as a curlicue. Either way, find a corner of the tarp. Once you accept a house grasp on information technology, accept a helper take hold of an opposite end. As you motion abroad from each other the tarp will naturally unroll.

  4. 4

    Lay the tarp out flat over the roof. Lay the tarp across the roof so that at least 4 feet (i.2 grand) lies on the sloped part of your roof on each side (known as the 'Peak'). Allow the rest of the tarp hang off the lower border of the roof that overhangs the wall (known as the 'Eave').[v]

    • Never lay the tarp out during a storm. Never walk on the tarp.

    5. Advertisement

  1. i

    Secure 4 2x4 (38 x 89mm) boards with a drill to the tiptop ends of the tarp. The 4 edges are the peak ends. Lay a 2x4 board under i of these ends. Make sure at to the lowest degree 2 anxiety (0.61 m) sticks out to the side. So, attach the tarp and board by hammering cap nails through the tarp and into the board underneath.[6]

    • Repeat this process 3 more than times so that all the height ends of the tarp have a board attached underneath them.

  2. 2

    Wrap the tarp around the boards. Wearing a pair of carpenter's gloves, wrap the tarp around the boards underneath so they're covered on all sides. Lift the board from underneath and rotate it counter-clockwise. Once the tarp has covered all sides, lay it downwards on the roof again. Echo this process for each wooden board.[seven]

  3. 3

    Screw through the tarp and the boards, into the roof with a drill. Cull half dozen as spaced spots on each 2x4 board. Then, with a drill, screw in two inches (5.1 cm) long screws. Make sure the screw goes through the tarp, and then the wooden board, and into the roof. Repeat this process for all the boards.[eight]

    • This secures the boards to the roof. Your tarp is now partly secured to withstand harsh weather.

  4. 4

    Lay 4 more 2x4 (38 x 89mm) perpendicular boards and screw them in. Lay the board flat on the roof. Identify the short end of this board against the long side of the screwed in boards. Make sure the new board is over the tarp. The new board should be perpendicular to the old board. And so, cull 6 equally spaced spots on the board and spiral in 2 inches (v.1 cm) screws with a drill.[9]

    • The screws should go through the board, then the tarp, so into the roof.

  5. five

    Adhere 2 2x4 (38 x 89mm) boards with a drill under the overhang of the tarp. With the elevation section secured, you need to secure the overhang. Bring the overhang onto the roof so you take a solid surface to work on. Then, put a 2x4 (38 x 89mm) wooden board nether each side, making sure 2 anxiety (0.61 m) of the board is sticking out of the side. Attach the boards to the tarp by using cap nails.[x]

  6. half dozen

    Curl the tarp'due south overhang nether the eave and screw it in. Roll the tarp back off the eave so that it'southward hanging off. Then, wrap the 2x4 (38 x 89mm) wooden boards counter-clockwise so the tarp wraps effectually them. Identify the boards tight confronting the base of operations of the eave. If there's whatsoever slack in the tarp, continue wrapping the boards. So, spiral the boards and tarp into the wall using 2 inches (5.1 cm) screws.[11]

  7. 7

    Screw more 2x4 (38 10 89mm) wooden boards onto the tarp where necessary. The boards that are attaching the tarp to the roof are known as 'anchor boards'. If you feel that the anchor boards aren't enough to secure the tarp to the roof, or you see some areas that are loose, you should act. Lay equally many 2x4 (38 10 89mm) wooden boards across the tarp as you see necessary and spiral them in with two inches (v.i cm) screws.[12]

    • This tarp is only a temporary fix to damage in the roof. Once you accept applied the tarp, brand plans to become a permanent fix for your roof.[xiii]

    8. Advertisement

Enquire a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertizing

Video

  • Placing a tarp on a roof can be unsafe work. If you tin can, rent a professional to do this or become some assistance from an experienced roofer.

Advert

  • Never stand on a tarp on a roof, especially if the tarp is wet.

  • Practice not climb up onto a roof during bad weather.

  • Never stand on a steep-pitched roof.

  • Do non walk on a damaged roof until you can pinpoint where the damage is. Exercise not walk on the damaged area. Information technology could be unstable.

  • Do not effort this project alone in case of injury.

Advertisement

Things You lot'll Need

  • Tape measure
  • Brush
  • Tarp
  • 4 2x4 (38 10 89 mm) boards
  • Cap nails
  • Carpenter'southward gloves
  • Drill
  • 2 inches (five.one cm) screws

About This Article

Article Summary 10

Tarping a roof is a proficient way to protect your home from the elements when your roof or skylight is damaged. All you'll need is a large tarp, 10 wooden boards, and screws or nails. Although you can probably manage the job lone, it'll exist much easier if you get at least ane more than person to assistance y'all, especially if it's windy. You'll need to lay the tarp over your roof and nail each side through a wooden board and into your roof to proceed information technology in place. And then, adhere the tarp to another couple of boards where it overhangs your roof. Avoid tarping your roof during bad weather, and never stand on the tarp one time it's on the roof, since it tin exist glace. For more tips, including how to assess the damage to your roof, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 225,050 times.

Did this commodity help you?

Source: https://www.wikihow.com/Tarp-a-Roof

0 Response to "How To Put A Tarp On A Roof"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel